How To Unlock BenQ:

Model: All BenQ

1. Insert an unauthorized Sim Card and turn ON your phone.

2. “Enter Network Key” box will appear.

3. Enter “Unlock Code” you buy from us.
STILL NEED TO UNLOCK - GO HERE

How To Unlock Blackberry:


WARNING: If after you enter "meood" or "mepd" from the unlock instructions below and your "Enter Network MEP" box show less than 4 try left (default is 10 try left). STOP, do not enter the unlock code.If you enter the wrong code and get to 0 try left, your Blackberry will be permanent locked. Therefore, with MEP Name, you are 100% sure that the unlock code is correct.


QUICK NOTE (Canada PHONES ONLY): If you order a Canadian Locked Blackberry Provider. Please make sure you read this first. Some phones requires MEP2 (Network Unlock) while some require MEP4 (Service Provider).


Bell Mobility: Requires MEP4 Code

Fido/Rogers: Requires MEP2 Code

Koodo: Requires MEP4 Code

Mobilicity: Requires MEP2 Code

Telus: Requires MEP4 Code

Videotron: Requires MEP2 Code

Virgin: Requires MEP2 Code

Wind: Requires MEP2 Code


BlackBerry Z10/Q10 Instructions

For all Providers Enter 16 Digit MEP2 Code

Rogers Canada: Use first 8 digits of MEP2 Code (ignore last 8 digits)

Bell Canada (use first 8 digits of Code, ignore last 8 digits)

Insert a non accepted sim card in your phone and turn it on.
You will be prompted to enter an unlock code (aka MEP2 Code).
Click Yes.
Enter the unlock code (MEP2) and press enter.
Phone is now UNLOCKED!

Most providers (IGNORE MEP4) - its not needed. Just use the MEP2 (Either 16 Digits or 8 digits as stated)


BlackBerry OS 6 Instructions (i.e. 9780 and 9800)

Method 1
Insert not accepted sim card in your phone and turn it on.
You will be prompted to enter an unlock code (aka MEP2 Code).
Click Yes
Enter the unlock code (MEP2) and press enter
Phone is now UNLOCKED!
Go to "Manage Connections" and turn Mobile network on.
Method 2
Go to Options -> Device
Select advanced system settings => and then Sim card
Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
Type MEP then [ALT BUTTON] then 2 on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
You should be presented with a prompt "Enter Network MEP Code". Type in the unlock code (MEP2) and press track pad to confirm.
Your phone is now unlocked!




Model: 6xxx 7xxx: Example; 6230, 7100, and 7290 etc.:

Before you start, you MUST take out the Sim Card & turn OFF ALL wireless radios

1. Press the Menu key.

2. Select Options / Settings.

3. Select Sim Card.

4. Enter MEPD (not case sensitive), Note: When typing in MEPD, the letters will not appear on the screen.

5. Then enter MEP Hold Alt Key and type number 2. NOTE: You must use the "alt" key to enable numbers, example: enter MEP hold "ALT key" and enter 2. Note: When typing in MEP2, the letters/number will not appear on the screen, this step open up the "Enter Network MEP" box. If you do not see "Enter Network MEP" box, you didnt type in MEP2 properly.


Model: 7100, 8100, 8110, 8120 & 8220, 9100:

Before you start, you MUST have a Sim Card & turn OFF ALL wireless radios

1. Press the Menu key.

2. Scroll to Turn Wireless Off and press the trackball (Will show Turn Wireless ON).

3. Scroll to Options and press the trackball.

4. Scroll to Advanced Options and press the trackball.

5. Scroll to SIM Card and press the trackball.

6. Type MEOOD (not case sensitive). This step opens up the personalization on the device.

7. Type MEOO, then hold ALT key and type number 2. Note: When typing in MEOO2 the letters/number will not appear on the screen, this step open up the "Enter Network MEP" box.

8. Enter Unlock Code.

9. Press the Enter Key. (Make sure you press the Enter Key within 5 second or you have to enter the unlock code again).


Model: 8700, 8700c, 8700g, 8700r

Before you start, you MUST have a Sim Card & turn OFF ALL wireless radios

1. Press the Menu key.

2. Scroll to and select Manage Connections. Select Turn All Connections Off.

3. Press the red end key or the Escape key to go back to the Home screen.

4. Scroll to and select the Setting icon.

5. Scroll to Options.

6. Scroll to and select Advanced Options.

7. Scroll to and select SIM Card.

8. Type MEPD Note: When typing in MEPD the letters will not appear on the screen. This step opens up the personalization on the device.

9. Type MEP then hold "Alt" key and type number 2. Note: When typing in MEP and hold "Alt" key and 2; the letters/number will not appear on the screen, this step open up the "Enter Network MEP" box.

10. Enter the unlock code.

11 .Press the Joydial to confirm ("Code Accepted should display)

12. Press and hold the red End key to turn the handheld off and then back on.

13. Once the device has powered on, follow steps 1 & 2 and restore connections.


Model: 8300, 8310, 8320, 8520, 8800, 8820, 8900, 9000, 9630, 9650, 9700, 9800

Before you start, you MUST have a Sim Card (could be Active or Inactive) & turn OFF ALL wireless radios

1. Press the Menu key.

2. Scroll to and select Manage Connections. Select Turn All Connections Off.

3. Press the red end key or the Escape key to go back to the Home screen.

4. Scroll to and select the Options icon.

5. Scroll to and select Advanced Options.

6. Scroll to and select SIM Card.

7. Type MEPD Note: When typing in MEPD the letters will not appear on the screen. This step opens up the personalization on the device.

8. Type MEP then hold "Alt" key and type number 2. Note: When typing in MEP and "Alt" and number 2; the letters/number will not appear on the screen, this step open up the "Enter Network MEP" box.

9. Enter the unlock code.

10. Press the trackball ("Code Accepted should display)

11. Press and hold the red End key to turn the handset off and then back on.

12. Once the device has powered on, follow steps 1 & 2 and restore connections.


Method 1: Model: 9500, 9530 Storm, 9550 Storm 2
Before you start, you MUST have an Unauthorized Sim Card inserted. Unauthorized Sim Card is a Sim Card that is NOT belongs to the provider of the phone. Example: If you have a Verizon phone, you need to insert a T-Mobile Sim Card inside the phone before turn it on.

1. Power on the phone.

2. Phone will said "MEP check failed. Do you want to enter MEP unlock code". Select Yes.

3. "Enter Network MEP code (# left)". Enter the unlock code.

4. Press Enter, you should see "Code Accepted"

5. You need to check Network Connection is set on GSM/UMTS. Menu>Manage Connection>Mobile Network Options and make sure it GSM/UMTS.

6. Once GSM/UMTS is selected. You can now ready to make phone call.


Notice: If the network not working after your phone is fully charged and unlocking process "Code Accepted". You must change from Verizon CDMA network to GSM Global Network a few times, after change from Verizon CDMA to GSM Global 3 times is completed, leaves it on GSM Global Network. Now it should work. (Verizon 8830 World Edition DOES NOT work inUSA )


Method 2: Model: 8830, 9500, 9530 Storm, 9550 Storm 2
Before you start, you MUST have Sim Card inserted & turn OFF ALL wireless radios, turn the phone sideways so you get the full QWERTY keypad.

1. Press the Menu key

2. Scroll to and select Manage Connections. Select Turn All Connections Off.

3. Press the red end key or the Escape key to go back to the Home screen.

4. Scroll to and select the Options icon.

5. Scroll to and select Advanced Options.

6. Scroll to and select SIM Card.

7. Type MEPD Note: When typing in MEPD the letters will not appear on the screen, this step open up the personalization on the device.

8. Type MEP then hold "Alt" key and type number 2. Note: When typing in MEP "Alt" and number 2; the letters/number will not appear on the screen, this step open up the "Enter Network MEP" box.

9. Enter the unlock code.

10. Press Enter (Press the trackball for 8830), you should see "Code Accepted"

11. Press and hold power key to turn the handset off and then back on.

12. Once the device has powered on, follow steps 1 & 2 and restore connections.


Notice: If the network not working after your phone is fully charged and unlocking process "Code Accepted". You must change from Verizon CDMA network to GSM Global Network a few times, after change from Verizon CDMA to GSM Global 3 times is completed, leaves it on GSM Global Network. Now it should work. (Verizon 8830 World Edition DOES NOT work inUSA )

Model: For Telus & Bell Mobility, Some Fido model and all carrier that have Service Provider block (MEP4).

Sometime we send you two sets of Unlock Code, use the code as a set;

Example:MEP2:43237528-AND-MEP4:35848078ORMEP4:4371476728858074.

Set 1:MEP2:43237528-AND-MEP4:35848078.

Set 2:MEP4:4371476728858074.

DO NOT mix these two sets. Determine which option look similar to your phone and then follows the correct instructions.

1. If your Blackberry has only Network "Active", then choose
Option 1. You ONLY need the MEP2 code we send you.

2. If your Blackberry has both Network and Service Provider "Active", then choose
Option 2. You need both the MEP2 and MEP4 code we send you.

3. If your Blackberry has only Service Provider "Active", then choose
Option 3. You ONLY need the MEP4 code we send you.


Option 1: Before you start, you MUST have Sim Card inserted & turn OFF ALL wireless radios, turn the phone sideways so you get the full QWERTY keypad.

1. Press the Menu key.

2. Scroll to and select Manage Connections. Select Turn All Connections Off.

3. Press the red end key or the Escape key to go back to the Home screen.

4. Scroll to and select the Options icon.

5. Scroll to and select Advanced Options.

6. Scroll to and select SIM Card.

7. Type MEPD Note: When typing in MEPD the letters will not appear on the screen, this step open up the personalization on the device.

8. Type MEP then hold "Alt" key and type number 2. Note: When typing in MEP and "Alt" and number 2; the letters/number will not appear on the screen, this step open up the "Enter Network MEP" box.

9. Enter the MEP2 code we send you.

10. Press Enter (Press the trackball for 8830), you should see "Code Accepted"

11. Press and hold power key to turn the handset off and then back on.

12. Once the device has powered on, follow steps 1 & 2 and restore connections.


Option 2: Before you start, you MUST have a Sim Card inside the phone (could be Active or Inactive) & turn OFF ALL wireless radios.

1. Press the Menu key.

2. Scroll to and select Manage Connections. Select Turn All Connections Off.

3. Press the red end key or the Escape key to go back to the Home screen.

4. Scroll to and select the Options icon.

5. Scroll to and select Advanced Options.

6. Scroll to and select SIM Card.

7. Type MEPD Note: When typing in MEPD the letters will not appear on the screen.

8. Type MEP then hold "Alt" key and type number 2. Note: When typing in MEP Alt 2 the letters/number will not appear on the screen, this step open up the "Enter Network MEP" box.

9. Enter the MEP2 code we send you.

10. Press the trackball ("Code Accepted" should display).

11. Type MEP then hold "Alt" key and type number 4.

12. Enter the MEP4 code we send you.

13. Press the trackball ("Code Accepted" should display again).

14. Press and hold the red End key to turn the handset off and then back on.

15. Once the device has powered on, follow steps 1 & 2 and restore connections.


Option 3: Before you start, you MUST have Sim Card inserted & turn OFF ALL wireless radios, turn the phone sideways so you get the full QWERTY keypad.

1. Press the Menu key.

2. Scroll to and select Manage Connections. Select Turn All Connections Off.

3. Press the red end key or the Escape key to go back to the Home screen.

4. Scroll to and select the Options icon.

5. Scroll to and select Advanced Options.

6. Scroll to and select SIM Card.

7. Type MEPD Note: When typing in MEPD the letters will not appear on the screen, this step open up the personalization on the device.

8. Type MEP then hold "Alt" key and type number 4. Note: When typing in MEP and "Alt" and number 4; the letters/number will not appear on the screen, this step open up the "Enter Network MEP" box.

9. Enter the MEP4 code we send you.

10. Press Enter (Press the trackball for 8830), you should see "Code Accepted"

11. Press and hold power key to turn the handset off and then back on.

12. Once the device has powered on, follow steps 1 & 2 and restore connections.

Here are the SPC/MSL CDMA Unlock Codes
MSL/SPC Code: To use this code:

1. From the home screen of the Blackberry, press the green call button to enter the phone.

2. Type in ##MSL/SPC CODE then the green talk button (ie: ##123456 Green talk button).

3. In the CDMA service edit screen, delete the number in the first row (000000xxxx) and replace it with your current phone number.

4. Press the menu key and choose save.

5. The device will re-boot.

When the device re-boots, Activation Required will be gone and the active carrier name will now appear.


Known issue for Verizon 8830 World Edition & 9530 Storm, 9550 Storm 2, Tour 9630:

1. If your Storm is not recognizing the network, make sure your phone battery is full and the radio is on.


2. Sometimes the phone requires you to do "MEPPD" and "MEPP2" instead of "MEPD" and "MEP2". If this occurs, redo unlock step above with "MEPPD" and "MEPP2"




3. If the network not working after your phone is fully charged and unlocking process "Code Accepted". You must change from Verizon CDMA network to GSM Global Network a few times, after change from Verizon CDMA to GSM Global 3 times is completed, leaves it on GSM Global Network. Now it should work. (Verizon 8830 World Edition DOES NOT work in USA )





Removing "Activation Required" on the screen for Verizon Storm:

1. On the main screen, press ##000000

2. For the Mobile Directory Number, Enter your phone number in here.

Press the Menu to save the options and the phone will automatically restart.

STILL NEED TO UNLOCK - GO HERE

How To Unlock Bosch:


Model: All Bosch

1. Insert an unauthorized Sim Card and turn ON your phone.

2. When the messages "Enter Network Key" appear

3. Enter Unlock Code
STILL NEED TO UNLOCK - GO HERE

How To Unlock Ericsson:


Notice: Ericsson, Sony, and Sony Ericsson are three different instructions. If you have Sony Ericssion, you MUST follow How To Unlock Sony Ericsson.


Model: All Ericsson

1. Switch ON your phone without SIM Card

2. Press the left arrow once

3. Press the button * two times

4. Press the left arrow once

5. "Personalize with MNC2" will appear

6. Enter Unlock Code
STILL NEED TO UNLOCK - GO HERE

How to Unlock Garminfone

1. Insert an authorized sim card. The phone will display "Network locked."
2. Double-tap the Lock icon to open the Dialer
3. Enter the unlock code
4. Click OK

Or
1. Insert an Unauthorized sim card. The phone will display "Network locked."
2. Double-tap the Lock icon to open the Dialer
3. Enter the unlock code
4. Click OK

Or

1. No SIM card, remove sim card
2. Power on the device. Note: Device will power up to a normal lock screen *except* the screen will say "Network Locked" near the top. There will also be a "missing SIM" warning icon in the status bar and a red slash through the cellular coverage bars to indicate that the phone is not registered on the network
3. Unlock the screen by double tapping the lock icon
4. Enter the unlock code and tap "OK".

STILL NEED TO UNLOCK - GO HERE

How To Unlock Handspring:


Model: Treo 180 & 270

1. Switch ON your phone without SIM Card

2. Enter *#*#Unlock Code#


Model: Treo 600 (Unlock method 1)

1. Insert an authorized Sim Card and turn ON your phone

2. Menu and select "Phone Tool" or "Phone Application

3. Enter on Virtual Keyboard *#*#Unlock Code#


Model: Treo 600 (Unlock method 2)

1. Insert an unauthorized Sim Card and turn ON your phone

2. Enter the Unlock Code
STILL NEED TO UNLOCK - GO HERE

How To Unlock HTC & T-Mobile MyTouch:

Model: All HTC Model
1. Insert an Unauthorized Sim Card and turn ON your phone
2. Phone will ask "SIM Network Unlock Code"
3. Enter Unlock Code

Model: HTC Snap/Dash 3G
1. Insert an Authorized Sim Card and turn ON your phone
2. Go to Setting.
3. Select Security.
4. Select Unlocking SIM.
5. Enter Unlock Code.

Model: Telus & Verizon HTC Touch Pro2 / Ozone / Imagio
1. Start
2. Go to Setting.
3. Select Security.
4. Select SIM Unlock My Phone.
5. Enter Unlock Code.
6. Go to main Menu, select Phone Network Mode.
7. Select GSM/UMTS only.

Model: Verizon Droid Incredible 2
1. Select Settings
2. Security
3. Disable SIM Card Lock
4. Enter Unlock Code

How to Hard Reset HTC Droid Incredible 2,
1. Turn OFF the phone. If your phone is freeze, pull out the battery and re-insert it;
2. Press and hold the Volume Down button and in the same time press the Power button until you’ll see the Android logo and text on a white screen;
3. Release the Volume Down button and use it to highlight Clear Storage;
4. Press the Power button to select the highlighted selection and you’ll get the following message “ Delete all user data?”;
5. Press Volume Up button to agree and the Hard Reset process will begin. When the Hard Reset process is finished, the device will reboot!

Model: United Kingdom Orange Desire
1. Insert an Unauthorized Sim Card and turn ON your phone
2. Phone will ask "SIM Network Unlock Code"
3. Enter Unlock Code
4. "SIM Service Provider Unlock PIN".
5. Enter Unlock Code again.

Code ERRORS

If you are getting Code Error and your phone is from the Provider stated on the purchase page, make sure your phone is not asking for a SIM CARD password. Those are different than a sim network unlock code.

We only support USA, CANADA, AND UK PROVIDERS ONLY. if you bought from a provider that is not from these countries, the code will NOT WORK due to your provider changing the code from factory default. We unfortunately cant refund, since we did state what provider the phone unlock code works for on our advertisement.


STILL NEED TO UNLOCK - GO HERE

Unlocking instructions for HTC HD2

Use the on-screen keyboard and make sure that wireless mode is OFF

Insert a non accepted SIM card and turn ON your HTC HD2
When prompted, enter unlock code
Your HTC HD2 is now unlocked!

How to unlock HTC 7 Surround

Insert a non accepted SIM card
Phone will display enter “SIM network unlock PIN”
Input the unlock code
Phone is now unlocked!

How to unlock HTC Wildfire

Insert a non accepted SIM card
Phone will display enter “SIM network unlock PIN”
Input the unlock code
Phone is now unlocked!

Notice: If you see a message Sim lock. You can still make emergency calls your phone has a blocked counter due to several previous incorrectly entered unlock codes. The only solution in this case is to upgrade phones ROM which will reset the counter and allow to enter the code
HTC Inspire 4G Unlocking Instructions

Insert a not accepted SIM card and turn ON your AT&T HTC Inspire 4G
Your AT&T HTC Inspire 4G should show "Enter Special or Subsidy Code"
Enter the unlock code
Your AT&T HTC Inspire 4G phone is now successfully unlocked!

Unlocking Instructions for T-Mobile MyTouch 4G

1st method

Insert a not accepted SIM card and turn ON your T-Mobile MyTouch 4G
A dialogue screen will prompt you to enter the unlock code
The box will say:
Title: Special Code Required
Dialog: Enter Code to enable SIM
Box for Code: 1-8 digits
Options: Enable or Cancel
In the upper right corner, the SIM is flashing where the signal strength should be. On entering the unlock code, a dialog box comes up saying "Authenticating Code".
In case you see the "Waiting for Activation Screen", hit the Menu key and the letter L key at the same time. The menu key is the top left key. By doing this, the waiting screen will go away and you will be able to make calls. For best results, hold down Menu and the L key until the "Waiting for Activation" screen disappears.
Your T-Mobile MyTouch 4G is now unlocked!

2nd method

Insert a not accepted SIM card and turn ON your T-Mobile MyTouch 4G
Your T-Mobile MyTouch 4G will prompt for unlock code
Enter unlock code
Your T-Mobile MyTouch 4G is now unlocked!

Unlocking instructions for G1, G2, 2125, 3125, 8100, 8125, 8525, 8925 (Tilt), P4600 (Fuze), Dash, Dash 3G, Wing, Shadow, Excalibur 100, MDA, SDA, Touch Pro 2 (TP2), myTouch 3G, Magic

Power on with non-allowed SIM card
Enter unlock code when prompted
Enter code using the ON-SCREEN keyboard (This is if the screen HAS an ON-SCREEN keyboard) when unlocking a Pocket PC phone
Press OK
Your HTC phone is now unlocked!

Problems with bypassing G1 GMail account: This link provides information on how to bypass the login if you are having issues when trying to use your phone with AT&T: Set-up AT&T on G1
How to obtain IMEI for Verizon HTC?

Go to: Start > Settings > Phone > Networks
Change from Global to GSM only
Go back to the home screen
Type *#06# and call key

Unlocking instructions for Verizon HTC Ozone, Imagio, Touch Pro 2

Power ON your phone
Go to: Start > Settings > Phone > Network
Put phone on GSM mode
Go to Security
Go to Select SIM Manager
Go to unlock SIM
Phone will prompt for a code, enter the unlock code and press OK

Unlocking instructions for HTC Aria

Insert a not accepted SIM card and turn ON your HTC
When prompted, enter unlock code
Attention! Use the onscreen keyboard and make sure that wireless mode is OFF
Your HTC Aria is now unlocked!

Notice: If you see a message SIM lock, you can still make emergency calls your phone has a blocked counter due to several previous incorrectly entered unlock codes. The only solution in this case is to upgrade phones ROM which will reset the counter and allow to enter the code
STILL NEED TO UNLOCK - GO HERE

How To Unlock Huawei:

Model: All Huawei
1. Turn ON the phone with an Unauthorized Sim Card.
2. Pone will prompt for Unlock Code.
3. Enter Unlock Code.
4. Phone now Unlocked.


How To Reset Simlock Block Huawei:

Modell: All Huawei
Notice: You must enter the 2nd code, 3rd code, and 4th code separately until the phone display “Sim Network Unlock Pin”, and then you enter the 1st code to unlock the phone.

1. Turn ON the phone with an Unauthorized Sim Card.
2. Enter the 2nd set of code.
3. Enter the 3rd set of code.
4. Enter the 4th set of code.
5. Enter the 1st set of code.
6. Phone now Unblocked and Unlocked.
STILL NEED TO UNLOCK - GO HERE

To complete the unlock, simply:

1. Open iTunes on your Mac or PC and verify that you have internet connectivity.

2. Connect your iPhone using the dock connector to USB cable that came with your iPhone.

3. Backup and restore your iPhone using iTunes .

For information on backup and restore, please visit ww_://support.apple.com/kb/HT1414

4. After restoring, your iPhone will be unlocked.
STILL NEED TO UNLOCK - GO HERE

How To Unlock Kenwood:


Model: All Kenwood

1. Insert an unauthorized Sim Card and turn ON your phone

2. Enter the Unlock Code

STILL NEED TO UNLOCK - GO HERE

Authorized sim = From same network as provider locked to.

Unauthorized sim = From a different provider than phone is locked to.
Terminology:
NCK/SIM_UNLOCK= = Unlock Code
SPCK = Service Provider Code

Submit: IMEI: 356525044437107
Result: NCK: 2918167327994401 NSCK: 3929847774723803 SPCK: 1389299809863784 CPCK: 8460406766580784 SIMCK: 4688930594592927

Explanation:
Unlock Code: 2918167327994401;
Service Provider Code: 3929847774723803 or 1389299809863784


LG Unlock Code (WHICH TO USE FOR YOUR PROVIDER)?

All Networks (MOST) = Unlock Code can be 8 or 16 digits Usually NCK (Network)
Fido/Telus/Tesco = REQUIRE both Unlock Code and Service Provider Codes (NCK AND SPCK)


New and LG Most Models

1. Insert an Unauthorized Sim Card

2. Phone will display \"Phone Restricted\"

3. Select \"Cancel\" and phone will show \"Phone Restriction Code\"

4. Enter Unlock Code

5. Select OK

1. The handset is now successfully unlocked


Model: LG P769 / LG Optimus L9


1: Turn on phone without Sim card.

2: Dial 2945#*769#.

3: A menu will popup to enter the code.

4: Insert the provided code and press OK

5: Device is now unlocked.


Model: LG C2000, CG225

1. Insert an Unauthorized Sim Card and turn ON your phone

2. The phone will display \"Phone Restricted\"

3. Select \"Cancel\"

4. The phone will display \"Phone Restriction Code\"

5. Enter Unlock Code

6. Select OK

7. The handset is now successfully unlocked


Model: LG Mytouch 4G (E739)

1. After turning on your mobile phone with no simcard

2. Get to the dial screen and press 2945#*739#

3. Click \"Network\"

4. Click \"Unlock Network\"

5. Enter Unlock Code, press OK

6. The handset is now successfully unlocked


Model: LG Mytouch 4G (E739)

1: Turn on phone without Sim card.

2: Dial 2945#*769#.



LG DoublePlay Unlocking Instructions:

1. Turn on phone with a non-accepted SIM card
2. Phone will prompt you for unlock code
3. Enter code that we provided
4. Your phone is unlocked!

or

1. Turn on phone with no simcard
2. Go to the dial screen and press 2945#*729#
3. Enter code that we provided
4. Your phone is unlocked!



Model: LG C800 MyTouch Q


1. After turning on your mobile phone with no simcard


2. Type 2945#*800#


3. Click \"Network\"


4. Click \"Unlock Network\"


5. Enter Unlock Code, press OK


6. The handset is now successfully unlocked






Model: LG Fathom VS750

1. Go to Settings

2. Advanced Settings

3. Personal

4. Slide to right to security

5. Tap Sim lock and enter code.




Model: LG CB630 Invision

1. Insert an Authorized Sim Card

2. Type *#865825#

3. Press CALL

4. Phone should ask for unlock code, enter code

5. The handset is now successfully unlocked


Model: LG CE110

1. Insert an Unauthorized Sim Card and turn ON your phone

2. The phone display “Invalid Smart Chip”

3. Select \"Cancel\"

4. The phone displays \"Phone Restriction Code\"

5. Enter Unlock Code

6. Select OK

7. The phone may reboot and the unlock is completed


Model: LG CF360

1. Insert an Unauthorized Sim Card and turn ON your phone

2. Power on the handset- phone will display \"phone restricted\"

3. Select \"Cancel\" - phone will display \"phone restriction code\"

4. Enter the SIM unlock code

5. Select \"OK\" - the handset is now successfully unlocked


Model: LG CT810 Incite

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter 2945#*810#

3. A Menu will open up

4. Select Sim unlock

5. Enter Unlock Code

6. Press OK

7. The phone will reboot and the unlock is complete


Model: LG CU320

1. Insert an Unauthorized Sim Card and turn ON your phone

2. Enter 277634#*#

3. Enter Unlock Code

4. Access the Sub-Menu \"Sim Test\" in the Test Mode

5. Enter 2945#*#

6. Access the Sub-Menu \"Sim Unlock\" which is activated after the special code

7. Enter Unlock Code in the \"Enter Unlock Code\"

8. Phone is now unlocked


Model: LG CU400 & CU405

1. Insert an Unauthorized Sim Card and turn ON your phone

2. The phone display “Invalid Smart Chip”

3. In Idle screen, enter 159753#*#

4. Phone will display \"Enter NCK, Remaining 5\"

5. Enter Unlock Code

6. Select OK

7. The phone may reboot and the unlock is completed


Model: LG CU500

1. Insert an Unauthorized Sim Card and turn ON your phone

2. The phone display “Invalid Smart Chip”

3. If the phone DOES NOT display invalid smartchip, please power off and on again.

4. In Idle screen, enter 159753#*#

5. Phone will display \"Enter NCK, Remaining 5\"

6. Enter Unlock Code

7. Select OK

8. The phone may reboot and the unlock is completed


Model: LG CU515, CU757 Trax

1. Insert an Unauthorized Sim Card and turn ON your phone

2. Enter *#865625#

3. Select 1 and then 1 again

4. Enter Unlock Code

5. Press OK

6. The phone may reboot and the unlock is completed


Model: LG CU720, TU720 & All LG Shine Series

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter *#865625#

3. Enter Unlock Code

4. Press OK

5. The phone may reboot and the unlock is completed


Model: LG CU915 & CU920 Vu

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter *#865625#

3. Sim unlock mode will open up

4. Enter Unlock Code

5. Press OK

6. Device should say “Network Lock Deactivated”

7. Phone may automatically reboot and is now unlocked


Model: LG E720, E720b Chic

1. Insert an Authorized Sim Card

2. Type 2945#*88110#

3. Phone should ask for \"USim Unlock\"

4. Enter the unlock code

5. The handset is now successfully unlocked

Or

1. Insert an Unauthorized Sim Card

2. Type *#865825#

3. Select \"USim Unlock\", then Select Network Lock

4. Enter the unlock code

5. Select OK

6. Phone may reboot

Or

1. Insert an Authorized Sim Card

2. Type 2945#*720#

3. Phone should ask for \"USim Unlock\"

4. Enter the unlock code


Model: LG e739 MyTouch

1. Insert an Authorized Sim Card and turn ON your phone

2. Type 2945#*739#

3. Click \"Network\"

4. Click \"Unlock Network\"

5. Enter Unlock Code, press OK

6. The handset is now successfully unlocked


Model: LG E900 Optimus 7

1. Insert an Unauthorized Sim Card

2. Type Sim Card PIN Code and submit

3. The message \"Please call your network provider to get the unlock\" will appear

4. At bottom of the screen, show keyboard with # and *, and asking for you to \"Type PIN\", enter code

5. The handset is now successfully unlocked


Model: LG E900h

1. Insert an Unauthorized Sim Card

2. Phone will ask for \"SIM PIN\"

3. Enter Unlock Code

4. Press OK

5. The handset is now successfully unlocked


Model: LG F2250

1. Insert an Unauthorized Sim Card

2. Type 2945#*3311#

3. Phone shows saved, then return to startup screen

4. Press Menu key, choose Settings > Security > Sim Lock> Network > Deactivate, handset will now show “Enter NCK”

5. Enter Unlock Code and press OK


Model: LG G2x P999 or P990




1. Input a non-accepted simcard
2. Go to the unlock menu
3. Input the unlock code
4. Phone is unlocked!


or


1. Power phone ON with original SIM
2. Type 2945#*999# to enter unlock menu
3. Enter the unlocking code


or


1. Power phone ON with original SIM
2. Type 2945#*990# to enter unlock menu
3. Enter the unlocking code



Model: LG GB255g

1. Insert an Unauthorized Sim Card

2. Type 2945#*71001#

3. Select \"USim Unlock\" and press OK when prompted for unlock code

4. Select Service Provider Lock. You will see this message \"You are about to SIM unlock your phone. Continue? Select Yes

5. Enter the unlock code and press OK

6. Enter the unlock code again and press OK

7. The handset is now successfully unlocked


Model: LG GD510 Pop

1. Insert without a Sim Card (Some version need an authorized Sim Card) and turn ON your phone

2. Enter 2945#*510#

3. Select \"Network Unlock\" option

4. Enter Unlock Code

5. Press OK


Model: LG GD570 Pop

1. Insert an Authorized Sim Card

2. Type *#865625#

3. Screen says you have entered unlock function, and cautions that after 10 failed attempts the phone will be permanently locked. Press OK to continue.

4. The phone will ask you to input the unlock code twice, do it. Be careful and type the code exactly as given

5. After entering the code a second time, the phone will be unlocked.

6. Press OK to exit and the pone will reboot by itself


Model: LG GD710 Shine II

1. Insert an Unauthorized Sim Card

2. Type *#865825#

3. The Phone will ask you to input the unlock code twice, enter code

4. The handset is now successfully unlocked


Model: LG GR500 Xenon

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter *#865625#

3. Sim unlock mode will open up

4. Enter Unlock Code

5. Press OK

6. Device should say “Network Lock Deactivated”

7. Phone may automatically reboot and is now unlocked

Or

1. Insert an Unauthorized Sim Card and turn ON your phone

2. Phone will display \"Phone restricted\"

3. Select \"Cancel\", phone will display \"Phone restriction code\"

4. Enter Unlock Code

5. Press OK

6. Device should say “Network Lock Deactivated”

7. Phone may automatically reboot and is now unlocked


Model: LG GS170

1. Power phone ON without SIM

2. Type 2945#*71001# to enter unlock menu

3. Enter unlock code


Model: LG GS290 Guide, Cookie

1. Insert an Unauthorized Sim Card

2. Type 2945#*290#

3. The Phone will ask you to input the unlock code twice, enter code

4. The handset is now successfully unlocked


Model: AT&T GS390 Prime GoPhone

Notice: Do not type 2945#*390# as this may cause an “Unknown Error” message

1. Insert an Unauthorized Sim Card

2. Power on the Device

3. Device will display with Invalid SIM Network Lock

4. Press Unlock

5. You see SIM Unlock Process

6. Select Yes

7. Enter CODE and press OK

8. Re-enter the CODE and select “OK”

9. Your phone is unlocked.


Model: LG GS505 Sentio

1. Power phone ON with original SIM

2. Type 2945#*505# to enter unlock menu

3. Enter the unlocking code


Model: LG GC900, GT360, GT810, KC550, KF600, KP230, KP500, KP501, KP270, KS360, KM500, KM900, GR500 Xenon Method 3

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter 2945#*71001#

3. Sim unlock mode will open up

4. Enter Unlock Code

5. Press OK

6. The phone will reboot and the unlock is completed


Model: LG GT365 Neon

1. Insert an Authorized Sim Card

2. Type *#865825#

3. Press CALL

4. Phone should ask for unlock code, enter code

5. The handset is now successfully unlocked


Model: LG GT505

1. Power on the phone without any sim card

2. Type 2945#*505#

3. The Phone will ask you to input the unlock code twice, enter code

4. The handset is now successfully unlocked


Model: LG GT540 Optimus

1. Insert an Authorized Sim Card

2. Type 2945#*540#

3. Tap empty space to enter code

4. The Phone will ask you to input the unlock code twice, enter code

5. The handset is now successfully unlocked


Model: LG GU297 Wink

1. Insert an Unauthorized Sim Card

2. Phone show \"Enter Special or Subsidy Code\"

3. Enter the unlock code

4. The handset is now successfully unlocked


Model: LG GW300 Viewty or Gossip

1. Insert an Authorized Sim Card

2. Type 2945#*300#

3. A menu will pop up, select SIM Unlock

4. Enter your unlock code and hit OK

5. Phone may reboot

Or

1. Power phone ON without SIM

2. Type 2945#*71001# to enter unlock menu

3. Enter unlock code or codes

Or

1. Insert an Unauthorized Sim Card - phone will display \"phone restricted\"

2. Select \"Cancel\" - phone will display \"phone restriction code\"

3. Enter the SIM unlock code

4. Select \"OK\" - the handset is now successfully unlocked


Model: LG GW520

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter 2945#*71001#

3. Sim unlock mode will open up

4. Enter Unlock Code

5. Press OK

6. The phone will reboot and the unlock is complete


Model: LG GW620, GW620r

1. Insert an Authorized Sim Card

2. Enter 2945#*620#

3. A menu will pop up, select sim unlock

4. Enter your unlock code and press OK

5. The phone will then reboot and the unlock is complete


Model: LG KC910, KF910 (aka LG Prada)

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter 2945#*910#

3. Sim unlock mode will open up

4. Enter Unlock Code

5. Press OK

6. The phone will reboot and the unlock is completed


Model: LG KE850 Prada

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter Sim PIN if required

3. Enter 2945#*8501# and press the call button (middle button, bottom of the screen)

4. SIM unlock mode will appear on screen

5. Enter Unlock Code

6. Select Reboot

7. Turn phone OFF, and then turn back ON again. Phone is now unlocked


Model: LG KE990 & KU990 Viewty Method 1

1. Insert an Authorized Sim Card and turn ON your phone

2. Press telephone icon at bottom of screen to bring up the phone keypad

3. Enter 2945#*990#

4. Sim unlock mode will open up

5. Enter Unlock Code

6. Press OK

7. The phone will reboot and the unlock is completed


Model: LG KE990 & KU990 Viewty Method 2

1. Power On the phone without a Sim Card

2. Hold \"Camera\" + \"Lock\" button

3. You will get keypad and Enter 2945#*990#

4. Enter Unlock Code

5. Your cell phone will be restart

6. Turn off cell phone and insert Sim Card

7. Unlock is completed


Model: LG KF300

1. Insert an Unauthorized Sim Card and turn ON your phone

2. Phone alert \"Insert Correct Card\"

In the screen, right under you see deblokkeren (Dutch), Click on it

3. Click \"Network Lock Off\"

4. Enter Unlock Code

5. Select OK


Model: LG KF390, KF390q, CF360 Method 2

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter *#865625#

3. Select Unlock USIM

4. Select Network Lock

5. Enter Unlock Code

6. Select OK


Model: LG KF600

1. Insert an Authorized Sim Card

2. Type 2945#*71001#

3. A menu will pop up, select Sim unlock

4. Enter your unlock code and press OK

5. The phone will then reboot and the unlock is complete


Model: LG KF700 (aka LG Virgo)

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter 2945#*700#

3. Sim unlock mode will open up

4. Enter Unlock Code

5. Press OK

6. The phone will reboot and the unlock is completed


Model: LG KF750

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter 2945#*750#

3. Sim unlock mode will open up

4. Enter Unlock Code

5. Press OK

6. The phone will reboot and the unlock is completed


Model: LG KF755d

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter 2945#*755#

3. Sim unlock mode will open up

4. Enter Unlock Code

5. Press OK

6. The phone will reboot and the unlock is completed


Model: LG KM900 Arena

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter 2945#*71001#

3. Menu appears, select Security>Sim Lock

4. Enter Unlock Code

5. Press OK

6. The phone will reboot and the unlock is completed


Model: LG KP100

1. Insert an Authorized Sim Card and turn ON the phone

2. Enter 2945#*20001#

3. Enter Unlock Code

4. Phone will reboot and phone is unlocked.


Model: LG KP265

1. Insert an Authorized Sim Card and turn ON the phone

2. Enter 2945#*265#

3. Menu will appear

4. Select Settings

5. Select Security

6. Select Sim Lock

7. Select Network

8. Select Deactivate

9. Enter Unlock Code


Model: LG ME550

1. Insert an Authorized Sim Card and turn ON the phone

2. Enter 2945#*71101#

3. Menu will appear

4. Select Settings

5. Select Security

6. Select Sim Lock

7. Enter Unlock Code

8. Press OK


Model: LG ME970

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter 2945#*9701#

3. Sim unlock mode will open up

4. Enter Unlock Code

5. Press OK

6. The phone will reboot and the unlock is completed


Model: LG P500h Optimus T

1. Insert an Unauthorized Sim Card

2. Type 2945#*500#

3. The Phone will ask you to input the unlock code twice, enter code

4. The handset is now successfully unlocked


Model: LG P505 Phoenix

1. Insert an Authorized Sim Card

2. Type 2945#*506#

3. Tap empty space to enter code

4. The Phone will ask you to input the unlock code twice, enter code

5. The handset is now successfully unlocked

Or

1. Turn the phone on and type *#865825#

2. Select Yes to continue

3. Enter the unlock code twice

4. Phone should said \"Network Lock Deactivated\"

5. Phone may reboot


Model: LG P506 Thrive

1. Insert an Authorized Sim Card

2. Type 2945#*506#

3. Tap empty space to enter code

4. The Phone will ask you to input the unlock code twice, enter code

5. The handset is now successfully unlocked

Or

1. Turn the phone on and type *#865825#

2. Select Yes to continue

3. Enter the unlock code twice

4. Phone should said \"Network Lock Deactivated\"

5. Phone may reboot


Model: LG P509 Optimus T

1. Insert an Unauthorized Sim Card

2. Type 2945#*509# to enter unlock menu

3. The Phone will ask you to input the unlock code twice, enter code

4. The handset is now successfully unlocked

Or

1. Power phone ON without SIM

2. Type 2945#*509# to enter unlock menu

3. Tap empty space to enter code

4. The Phone will ask you to input the unlock code twice, enter code

5. The handset is now successfully unlocked

Or

1. Insert an Authorized Sim Card

2. Type 2945#*509#

3. Tap empty space to enter code

4. The Phone will ask you to input the unlock code twice, enter code

5. The handset is now successfully unlocked


Model: LG P999 G2x

5. Insert an Authorized Sim Card

6. Type 2945#*999#

7. The Phone will ask you to input the unlock code twice, enter code

8. The handset is now successfully unlocked

Or

6. Insert an Unauthorized Sim Card

7. Phone will display \"Phone Restricted\"

8. Select \"Cancel\" and phone will show \"Phone Restriction Code\"

9. Enter Unlock Code

10. Select OK

2. The handset is now successfully unlocked


Model: LG Quantum

1. Insert an Unauthorized Sim Card

2. Phone will display \"Phone Restricted\"

3. Select \"Cancel\" and the phone will display \"Phone Restriction Code\"

4. Enter Unlock Code

5. The handset is now successfully unlocked


Model: LG TE365 Neon

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter *#865625#

3. Select Yes

4. Enter Unlock Code

5. Enter Unlock Code again.

6. Press OK

7. The phone may reboot and the unlock is completed


Model: LG TU330

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter *#865625#

3. Sim unlock mode will open up

4. Enter Unlock Code

5. Press OK

6. The phone will reboot and the unlock is completed


Model: LG TU550

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter 2945#*9701#

3. Sim unlock mode will open up

4. Enter Unlock Code

5. Press OK

6. The phone will reboot and the unlock is completed


Model: TU915

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter 2945#*9701#

3. Sim unlock mode will open up

4. Enter Unlock Code

5. Press OK

6. The phone will reboot and the unlock is completed

Or

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter *#865625#

3. Sim unlock mode will open up

4. Enter Unlock Code

5. Press OK

6. The phone will reboot and the unlock is completed


Model: LG U300

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter 815118#*#

3. Sim unlock mode will open up

4. Enter Unlock Code

5. Press OK

6. The phone will reboot and the unlock is completed


Model: LG U310

1. Turn ON the phone without Sim Card

2. Enter 815118#*#

3. Sim unlock mode will open up

4. Enter Unlock Code

5. Press OK

6. The phone will reboot and the unlock is completed


Model: LG U400

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter 2945#*88110#

3. Phone will prompt “Unlock Sim”

4. Press OK

5. Phone will prompt “Network Unlock”

6. Press OK

7. Phone will prompt “Input Network Control Key”

8. Enter Unlock Code (If the unlocking code comes with only 7 digits, add 0 in front of the 7 digit code. If the unlocking code comes with only 6 digits, add 00 in front of the 6 digits code)

9. Press OK

10. The phone may reboot and the unlock is completed


Model: LG U830

1. Insert 3G Sim Card and turn ON your phone

2. Enter 94471877#*#

3. Select \"Unlock USIM\"

4. Select \"Network Unlock\"

5. Enter Unlock Code

6. Phone will show \"Network Unlock Success\" and The phone will reboot and the unlock is completed


Model: LG U970

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter 2945#*970#

3. Sim unlock mode will open up

4. Enter Unlock Code

5. Press OK

6. The phone will reboot and the unlock is completed


Model: LG U81xx

1. To bring up the unlock menu on the phone with a SIM card, type 2945#*88110#

2. Enter Unlock code

In case you need to reset the phone without a SIM card first, type 277634#*# or 47328545454#


Model: LG U8150 Method 1

1. Insert an Unauthorized Sim Card and turn ON your phone

2. Enter 277634#*#

3. Select Menu then \"SIM Lock\"

4. Enter Unlock Code


Model: LG U8150 Method 2 with Service Provider lock

1. Insert an Unauthorized Sim Card and turn ON your phone

2. Enter 277634#*#

3. Select Menu then \"SIM Lock\"

4. Enter Unlock Code

5. The phone will then prompt \"Input Network Control Key\" (Enter the 8 digit unlock code. Press OK. If the unlock code comes wiht 7 digits, add a 0 in front. If the unlock code comes with 6 digits, add 00 in front

6. It should give you the message Success

7. The phone will then prompt for Unlock Sim. Press OK

8. The phone will then prompt Network Unlock/Lock. If you scrool down, you will see a message Enter SP Lock. Enter Service Provider Code

9. Then press OK


Model: LG U8210

1. Insert an Unauthorized Sim Card, enter Pin code then validate

2. Type 277634#*#

3. Shows test menu, choose sim test menu

4. Type: 2945#*#, choose Sim Unlock menu

5. Phone shows \"Enter NCK\"

6. Enter Unlock Code, then hit OK


Model: LG X2 Optimus

1. Insert an Unauthorized Sim Card

2. Type 2945#*990#

3. The Phone will ask you to input the unlock code twice, enter code

4. The handset is now successfully unlocked


Model: ALL other model

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter:
LG 510W: Enter 2945#*5101#
LG 1200 & B1200: Enter 1945#*5101#
LG 5200 & 52200: Enter 2945#*5221#
LG 5300: Enter 2945#*5301#
LG 5400: Enter 2945#*5401#
LG 7020: Enter 2945#*70001#
LG 7100: Enter 2945#*7101#
LG 1100: Enter 2945#*1201# or 2945#*70001#
LG 7250T: Enter 2945#*70001#
LG C2200: Enter 2945#*2201#
LG C3310: Enter 2945#*3311#
LG T5100: Enter 2945#*5301#

3. Select Menu

4. Select Settings

5. Select Security

6. Select Network Provider

7. Select Deactivate

8. Enter Unlock Code


Model: Classified by Model

1. Insert an Authorized Sim Card and turn ON your phone

2. Enter:
LG C3100: Enter 2945#*3101#
LG C3380: Enter 2945#*7101#
LG F2300: Enter 2945#*7101#
LG KE260: Enter 2945#*2601#
LG KE970: Enter 2945#*9701#
LG KG120: Enter 2945#*1201#
LG KG220: Enter 2945#*1201#
LG KG240: Enter 2945#*3311#
LG KG280: Enter 2945#*7101#
LG KG290: Enter 2945#*7101#
LG KG800: Enter 2945#*7101#
LG KU250: Enter 2945#*250#
LG KU380: Enter 2945#*380#

3. Select Menu

4. Select Settings

5. Select Security

6. Select Sim Lock

7. Enter Unlock Code

8. Press OK

9. The phone may reboot and the unlock is completed


Model: Classified by Model

1. Insert an Unauthorized Sim Card and turn ON your phone

2. Enter:
LG C3100: Enter 2945#*3101#
LG C3380: Enter 2945#*7101#
LG F2300: Enter 2945#*7101#
LG KC550: Enter 2945#*71001#
LG KE260: Enter 2945#*2601#
LG KF240: Enter 2945#*240# or 2945#*2401#
LG KF600: Enter 2945#*71001#
LG KF750: Enter 2945#*750#
LG KG120: Enter 2945#*1201#
LG KG220: Enter 2945#*1201#
LG KG240: Enter 2945#*3311#
LG KG275: Enter 2945#*20001#
LG KG280: Enter 2945#*7101#
LG KG290: Enter 2945#*7101#
LG KP270: Enter 2945#*270#
LG KS500: Enter 2945#*500#
LG KT520: Enter 2945#*520#
LG KU250: Enter 2945#*250#
LG KU311: Enter 815118#*#
LG KU380: Enter 2945#*380#
LG KU580: Enter 2945#*580#
LG KU800: Enter 82652#*#
LG L600v: Enter 815118#*#
LG U400: Enter 2945#*88110#
LG U8150: Enter 277634#*#
LG U8210: Enter 277634#*#
LG U8500: Enter 277634#*#

3. Enter Unlock Code

4. Press OK

5. The phone may reboot and the unlock is completed
STILL NEED TO UNLOCK - GO HERE

How To Unlock Mitsubishi:

---

Model: Trium Mars

1. Turn ON your phone without Sim Card

2. Press and hold * key and enter 787090 or 787292

3. The “Unlock Network" box will appear

4. Select "YES"

5. Enter Unlock code


Model: M341i

1. Insert an authorized Sim Card and turn ON your phone

2. Press and hold * key and enter 787292

3. The "Unlock Network" box will appear

4. Select "YES"

5. Enter Unlock Code


Model: M342i

1. Insert an authorized Sim Card and turn ON your phone

2. Press and hold * key and enter 787090

3. The "Unlock Network" box will appear

4. Select "YES"

5. Enter Unlock Code


Model: ALL other model

1. Turn ON your phone without Sim Card

2. Press and hold * key and enter 787292 or 78729

3. The "Unlock Network" box will appear

4. Select "YES"

5. Enter Unlock Code

STILL NEED TO UNLOCK - GO HERE

Submit: IMEI: 353648041728824 Result: 82630896 99145997
(NOTICE THERE IS A SPACE BETWEEN CODES. THIS DENOTES TWO SEPARATE CODES)


Explanation: Unlock Code: 82630896 or 99145997 (Usually its first code ONLY)


How To Unlock Motorola:


Model: All Motorola; check below for exception
1. Insert an unauthorized Sim Card and turn ON your phone.
2. “Enter Subsidy Code” box appear
3. Enter Unlock Code


WARNING: If one of these messages appears:
-"Contact Service Provider"
- "Tamper Alter"
- "Wait before enter special Code"
- "Contact Service”
Its because you or somebody already enter too many wrong codes, you just have to let the phone ON at these errors message (do not close the phone if V3) and after 40 minutes to 12 hours, the message " Enter Subsidy Code" will appear again.


Model: A1000 and other A series model
1. Click on the Phone icon
2. Enter **057*
3. "Locking Enter Personalization" box appear
4. Enter Unlock Code
5. Press Ok


Model: L6i & L7i (NOT L6 and L7)
1. Press and hold * key and enter 787090
2. “Menu Network” box will appear
3. Select Yes
4. Press OK
5. Will ask for code
6. Enter Unlock Code


Model: All Motorola 3G network model
1. Enter **057*
2. Enter Unlock Code


Motorola CDMA & TDMA
1. Enter 74663# [Menu] [Menu] and you will be asked for a Subsidy Code
2. Enter Unlock Code


Motorola MPX
1. Insert an unauthorized Sim Card and turn ON your phone
2. If the phone is asking for NETWORK PIN
3. Enter the NETWORK PIN
4. If the phone is asking for SERVICE PROVIDER PIN
5. Enter the SERVICE PROVIDER PIN
6. Your phone is now unlocked


Motorola Cliq Q700 Activation bypass.
1. Press Menu and L key together


Network PUK
If the phone is asking for NETWORK PUK: Power on the phone with the original Sim Card in and wait till phone is fully powered on and you have access to menu. Enter *#**364# and press green button. You will get an error message and thereafter, you will see an Engineering Menu:
1. Select Options
2. Select GSM Test
3. Select Send AT command
4. Now you will see a new window Saying "Send AT Command"
5. Enter AT+CLCK="PN",0,"[SERVICE PROVIDER PIN or NETWORK PIN]"
6. Press send
If you get Response "0 []" phone is unlocked. If you get 1 error, then make sure you have typed the code correct and try the other code. Turn your phone off, take battery out. Put battery back in. Power on the phone and leave it for 40 minutes to 12 hours until the message "Enter NETWORK PUK" is gone. Now enter the Unlock Code and 00000000 (eight zeros) as a new password


Service Provider PUK
If the phone is asking for SERVICE PROVIDER PUK: Power on the phone with the original Sim Card in and wait till phone is fully powered on and you have access to menu. Enter *#**364# and press green button. You will get an error message and thereafter, you will see a Engineering Menu:
1. Select Options
2. Select GSM Test
3. Select Send AT command
4. Now you will see a new window Saying "Send AT Command"
5. Enter AT+CLCK="PN",0,"[SERVICE PROVIDER PIN or NETWORK PIN]"
6. Press send
If you get Response "0 []" phone is unlocked. If you get 1 error, then make sure you have typed the code correct and try the other code. If you do not have the original Sim Card or if the original Sim Card is not accepted because you flashed the phone with other firmware, then we cannot help you.
STILL NEED TO UNLOCK - GO HERE

How To Unlock NEC:

Model: N342i
1. Turn ON your phone without Sim Card
2. Enter **00012*Unlock Code#


Model: All others NEC
1. Turn ON your phone without Sim Card
2. Enter #7320*Unlock Code#


Model: Old NEC
1. Turn ON your phone without Sim Card
2. Enter #3210*Unlock Code#
3. Press Call Button
STILL NEED TO UNLOCK - GO HERE

WARNING: Nokia phone allow ONLY three wrong attempt and phone will lock up. Kindly understand the instruction carefully before entering the code into the phone.

NOTE: If you receive an error message while performing the instructions below, STOP. Please be aware that if an excessive amount of incorrect attempts are made, the phone will be permanently locked. Verify the IMEI by pressing *#06# and submit a new request.

For Nokia Lumia 900 Unlocking Instructions:
Nokia Lumia 900 Unlocking Instructions:

1. Switch ON your phone with a non accepted simcard
2. Phone will ask you to Enter Unlock Pin
3. Input the 8 digit Unlock Code

If code is Not working FOR LUMIA 900 ATT:

The workaround is this: Enter the incorrect code until you run out of your ten (10) attempts. Then you"ll get the *real* network unlock message, with 32 attempts. Enter the same 8-digit code you"ve been entering,

http://www.youtube.com/watch?v=8SO5ZXQy1zM


For ROGERS, FIDO and ChatR:
Use +7 at the end first, if "Code Error" then try +1

For TELUS and BELL
Use +5 at the end first, if "Code Error" then try +1 or +7

For AT&T and T-Mobile USA:

#PW+UNLOCKCODE+1#




For UK Networks
Use +1 at the end first, if "Code Error" then try +7

Model: For Most Nokia (Except Fido/Rogers and Model below)
1. Insert an Authorized Sim Card and turn ON your phone. (Authorized Sim Card is the original carrier Sim Card that come with the phone)
2. Press #
3. Press * three times = P
4. Press * four times = W
5. Press * twice = +
6. Enter the Unlock Code
7. Press * twice = +
8. Press 1, then # and the display should read "SIM Restriction Off"
Note: It should look similar to this: #pw+CODE+1# (CODE is the Unlock Code we send you)

Model: For Most Nokia for Fido/Rogers
1. Insert an Authorized Sim Card and turn ON your phone. (authorized Sim Card is the original carrier Sim Card that come with the phone)
2. Press #
3. Press * three times = P
4. Press * four times = W
5. Press * twice = +
6. Enter the Unlock Code
7. Press * twice = +
8. Press 7, then # and the display should read "SIM Restriction Off" IF "Code Error", use 1 instead of 7.
Note: It should look similar to this: #pw+CODE+7# (CODE is the Unlock Code we send you) or #pw+CODE+1#

Model: T-Mobile Lumia 710
1. Insert a T-Mobile Micro SIM Card
2. Turn on the handset
3. Click on Phone Button from the Home Page
4. Next click on the Keyboard
5. Enter in: ##782#
6. Next Click the Call Button (a box will appear to enter the PIN for unlocking)
7. Enter the 8 digit Unlock Code that was provided
8. Click on the Enter Key (device should read "PIN Accepted")
Or
1. Insert a Non T-Mobile Micro SIM Card.
2. Turn on the handset. Note: the phone will display a message, "This SIM Card can only be used on specific networks. Contact you Customer Service Center for the Unlock Code. 10 attempts remaining."
3. Enter the 8 digit Unlock Code that was provided.
4. Click on the Enter Key (device should read "PIN Accepted").

Model: Nokia C3
1. Insert an Unauthorized Sim Card and turn ON your phone.
2. Phone will display SIM is restricted
3. Press OK to be able to enter the Unlock Code
4. Type: #pw+CODE+1# and press OK (Rogers / Fido use #pw+CODE+7#)
Phone is unlocked!
Note: It should look similar to this: #pw+CODE+1# (CODE is the Unlock Code we send you)

**NOTE: For Nokia C3 ONLY, DO NOT use * , type #PW+ directly on the keypad and Replace CODE with the Unlock Code we send you.

Cable Instruction after 3 wrong attempt or Phone locked
If you are receiving "CANNOT UNDO RESTRICTION", " NOT ALLOWED", "PHONE RESTRICTIONS" message. This means your phone is hard-locked and you will have to use the following software:

Require the following:
1. An Original USB Cable for your Nokia phone (Cannot be generic USB Cable).
2. The correct USB Cable Drivers.
3. Installing the "Nokia PC Suite" software that you can obtain from the Nokia website will install the appropriate USB Cable Drivers. You can find it HERE
4. A small software application that you can download from HERE.
5. The Unlock Code from us.

Once you have all above requirement, follow these directions below:
1. Switch on your phone without a SIM Card. You should be prompted to "Start Phone Without SIM Card" or similar. Click "Accept" or "OK". Your phone is now in offline mode.
2. Turn off all antivirus software on your computer.
3. Connect your Nokia phone to the PC using the USB Cable. Your phone will display several options, PC Suite Mode", mass storage mode etc... stay in this screen, do not select any of the options.
4. Start the SendCodeUsb application you downloaded earlier and click on the "Read Phone Info" button. The application should display several lines of information. If it says "not found" replug your phone into the usb, and then click read phone info
5. If the application still displays "Not Found", your USB Cable Drivers are not correctly installed. In this case you will need to uninstall, then re-install the USB Cable Drivers. This procedure will not work unless the drivers are correctly installed. Trying an alternative USB Port may also help. DO NOT move on to the next step until you have successfully installed the USB Cable Drivers and the software can read the information from the phone.
6. Now make sure you check the "Check For Fbus" checkbox. Also make sure the "Level(1-7)" selection is set to the appropriate carrier.

For Rogers and Fido use +7 or +1
For all Telus devices use +5 or +1
For all UK devices use +1 and +7
For all T-Mobile USA devices use +1
For all AT&T devices use +1

7. Enter ONLY the numbers of the correct Unlock Code into the "Unlock Code (15 digits)" field e.g. if your correct Unlock Code was #pw+123456789012345+1# you would enter only 123456789012345 in this field)
8. Click on the "Send Unlock Code" b
STILL NEED TO UNLOCK - GO HERE

How To Unlock PalmOne Treo:


Model: Treo 180 & 270
1. Turn ON your phone without Sim Card
2. Enter *#*#Unlock Code#


Model: Treo 600, 650, 680 (Centro), 750
1. Insert an unauthorized Sim Card and turn ON your phone
2. It will then say "Your phone cannot be used with this SIM card"
3. Click OK
4. Click dial pad tab, bottom of the screen far left
5. Using stylus enter *#*#Unlock Code#
6. Press the green button
7. It will then say “The SIM Lock has been removed from the phone"

Troubleshooting:
Error Message: "The SIM Lock has NOT been removed from this phone"

Solution 1: Please make sure you are entering the correct code and enter it using this method *#*#Unlock Code# dial

Solution 2: If the phone says that the SIM lock has not been removed, ensure that the phone radio (wireless mode) is on
STILL NEED TO UNLOCK - GO HERE

How To Unlock Panasonic:


Model: GD67, GD68, GD87, GD88, X70, P341i
1. Turn ON your phone without Sim Card
2. Enter 746 and press OK twice (OK OK)
3. New Menu will appear
4. Select "NCK"
5. Enter Unlock Code

Model: G60
1. Insert an unauthorized Sim Card and turn ON your phone
2. Enter your PIN Code and Confirm
3. Press OK button once again
4. Enter Unlock Code

Model: GD50 & GD55
1. Turn ON your phone without Sim Card
2. Enter **00012*Unlock Code#

Model: X60 & X400 (Unlock Method 1)
1. Insert an authorized Sim Card and turn ON your phone
2. Enter 52824**
3. New Menu will appear
4. Select "NCK"
5. Enter the Unlock Code

Model: X60 & X400 (Unlock Method 2)
1. Insert an authorized Sim Card and turn ON your phone
2. Enter 52824**
3. Enter 746 and press OK twice
4. New Menu will appear
5. Select "NCK"
6. Enter Unlock Code


Model: X100
1. Insert an authorized Sim Card and turn ON your phone
2. Enter #*7465625*638*Unlock Code#
STILL NEED TO UNLOCK - GO HERE

How To Unlock Pantech


---------- Instructions ----------

Read This First

* Make sure "Airplane Mode" and "Wi-Fi" is turned off under wireless connections if your Pantech
is an Android device.


Model: C150 (at&t), C530
1. Insert an unauthorized Sim Card and turn ON your phone
2. The display will show “Change SIM” and Left Soft Key will be labeled “Unlock”
3. Press Left Soft Key - A “Password” box will appear
4. Enter Unlock Code
5. Press “OK” - Center Soft Key
6. The device will display “rebooting” and then power cycle
7. The device is now unlocked

Model: All other model (method 1)
1. Insert an authorized Sim Card and turn ON your phone
2. Enter *#865625#
3. A Sim Unlock Menu will appear
4. Press OK
5. Enter Unlock Code
6. Re-enter Unlock Code
7. The phone will display Unlock Process Complete
8. Press OK
9. The phone is now unlocked


Model: All other model (method 2)
1. Insert an unauthorized Sim Card and turn ON your phone
2. A Sim Unlock Menu will appear
3. Enter Unlock Code
4. The phone will display Unlock Process Complete
5. The phone is now unlocked

---

---------- Trouble Shooting ----------





"Code Error" or "Sim Network Unlock Unsuccessful" What do I do?

* Please check your IMEI number by pressing *#06#, this is the most common reason the code doesnt work. If the first 15 digits which appear is different from the 15 digit IMEI number provided above, please reply directly to this E-mail.





I can make Calls and Text but Im not getting Internet Service.

In this case you will need to adjust whats called the APN settings. The APN settings vary depending on the service provider you are trying to use. Please contact your service provider and they can assist you setting this up. There is no separate unlock for data or internet. If you can call or text, your phones network is fully unlocked.



My Phone is asking for the "PUK" or "Security Pin" or "Password"

If your phone is asking for one of the above, it is the Simcard personal password or phone security password NOT the Network Lock which we provide for you. You can contact your service provider for this. Once you bypass this, you can use the Network Unlock Code provided by us.





*if you are receiving the message "Incorrect Pin Code 5 tries left"



This is NOT the unlock code, this is your phones personal password or simcards password. You must by pass this first and then enter the network unlock code we have provided you with.





My Phone seems to be unlocked but Im not getting any signal

First of all, we do request you contact the service provider to make sure after unlocking your device, your unlocked phone will be compatible on their network. Not all GSM phones are compatible with any Network after unlocking it. The unlocked phone must be able to support the Networks Frequency. If you are unsure of this, please contact them regading this.


After unlocking your phone, please pull the battery for a couple minutes and then restart the device. It may take a few minutes for your phone to pick up the new signal. Also go to your Network settings on your phone, and make sure the device can detect the signal from the simcard you are trying use.
STILL NEED TO UNLOCK - GO HERE

How To Unlock Philips:


Model: All Philips
1. Insert an unauthorized Sim Card and turn ON your phone
2. "Enter NCK" appear
3. Enter Unlock Code

STILL NEED TO UNLOCK - GO HERE

How To Unlock Sagem:

---

Model: Sagem My-S7
1. Turn ON your phone without Sim Card
2. Enter *#*#Unlock Code#
3. Press "Call" button

Model: All Sagem
1. Insert an unauthorized Sim Card and turn ON your phone
2. “SIM VERROU" box appear
3. Enter Unlock Code

WARNING: if your mobile show "CODE POSTE" its because you have a Security Code on this phone. It may be 0000 or 1234. This is a security code that was setup by you or the original owner. We cannot get this security code. We only process Unlock Code, NOT Security Code.
STILL NEED TO UNLOCK - GO HERE

Terminology:
NCK= Network Unlock Code (The one that you use)
FREEZE = Unfreeze Code for Samsung
DEFREEZE = Unfreeze Code for Samsung
MCK = Unfreeze Code for Samsung
Provider = Provider Unlock (Secndary lock rare)


If you receive Unlock Code in the follow format. Here is the explanation.

SAMSUNG USA/EUROPE/CANADA
Submit: IMEI: 357360030287087

Result: NETWORK=48275379 PROVIDER=18592938 SUBPROVIDER=91709809 DEFREEZE=06158509

Explanation: Your Unlock Code: 48275379 (Ignore rest of codes)


How To Unlock Samsung.


IMPORTANT NOTICE: Make sure to turn off Wi-Fi under wireless connections to OFF for all Android Device before proceeding to entering the Unlock code. Also make sure the phone is not on Airplan mode is off too. Our Samsung code process is 99.9% accurate if you provide the correct information. Therefore, a Video proof will be required if code error occur for verification. It is also good idea to film your unlocking process so I may help to troubleshoot the problem. Please ask us for details to include on refund videos

If you get "Network Unlock Unsuccessful" message. This is a known issue so not to worry. At the end of this instruction, there is a troubleshoot guide to help you resolve this issue.

Model: Most New Samsung Model (Recent Phones ANDROID)

1. Insert Unauthorized Sim Card into device
2. Power on the device
3. Enter Unlock Code when prompted
4. Device should be unlock if "Code Accepted"

If the phone shows "the message Phone Freeze" with an unauthorized sim, this means someone already has tried wrong codes many times and has hardlocked the phone. You will need a defreeze (unfreeze) code at this point (we do sell those please contact us)

If you enter an Unauthorized Sim Card and phone does not prompt to enter Unlock Code and your Samsung is android, Go to the dial screen and press #7465625*638*# Once prompted for code, enter 8 digit Unlock Code.

Or

If you see "No Valid Sim Card" after you insert an Unauthorized Sim Card, remove the Unauthorized Sim Card and use the Authorized Sim Card or with NO Sim Card and follow this instruction.

1. Type #7465625*638*CODE# (CODE is the Unlock Code I sent you)
2. Phone deactivated message means its unlocked

Or

1. Switch ON the phone without a Sim Card (if this does not work try with a Unauthorized Sim Card first and if necessary try an Authorized Sim Card )
2. Type: #0111*CODE# (CODE is the Unlock Code I sent you)


Model: A107, A137, A167, A177, A227, A237, A437, A517, A707, A767 Propel, A837 Rugby, A798 Mythic, A867 Eternity, A887 Solstice, C417, E250, E370, E590, F400, F480, F490, G600, i907 Epix, J700, L760, S366, T309, T319, ST349, T409, T429, T439, T459 Gravity, T469, T509, T609, T639, T659, T669, T919 Behold, T929, U900, X497, Z105, Z107, Z560.

1. Turn ON your phone without Sim Card
2. Type #7465625*638*CODE# (CODE is the Unlock Code I sent you)
3. Device should say "Network Lock Deactivated"
4. The phone may reboot and the unlock is completed

Or

1. Turn ON your phone Authorized Sim Card
2. Type #7465625*638*CODE# (CODE is the Unlock Code I sent you)
3. Device should say "Network Lock Deactivated"
4. The phone may reboot and the unlock is completed


Solution for "Network Unlock Unsuccessful" or "Code Error"


First check the IMEI you provide by type *#06# on the phone. If you provide the correct IMEI, then continue.

Solution #1

(Samsung Galaxy S2, S3, Note , Note 2)

Follow these step carefully, as long as you have the correct code it will work 100% (Your phone must be updated to the latest firmware!)

1. Please trouble shoot as usual with the customer, the code must be correct and the phone MUST prompt for the code.

2. If nothing we can proceed to use the "release method" on the phone(s):

a. Go to the Dial pad and dial *#197328640#

b. Please click on number [1] UMTS > [1] Debugging screen > [8] Phone Control > [6] NETWORK LOCK

c. You will see 3 options

d. Please click on number [1] Perso Sha256 INFO, the screen will change slightly

e. Please hit the MENU button then when the menu pops up please carefully hit BACK to return to the previous screen

f. Please click on number [2] Perso Sha256 ON, the screen will change again to a one line message

g. Restart the phone on the screen by holding the power button and click RESTART

h. When the phone prompts for the unlock code simply enter the unlock code

i. Your phone is now permanently unlocked!


(Samsung Galaxy S4 Only)
Follow these step carefully, as long as you have the correct code it will work 100% (Your phone must be updated to the latest firmware!)

1. Make sure that the phone PROMPTS for the code with a NON accepted sim card and that your IMEI is correct by dialing *#06#

a. Go to the Dial pad and dial *#0011#

b. Please click your MENU button (Bottom LEFT button) and click BACK on the menu that appears, Nothing will happen do not worry please move to the next step

c. Please click your MENU button AGAIN and this time click KEY INPUT

d. When the Key input box appears please input the number "1" and hit OK

e. You will see a number 1 for a while, please wait until it changes into the SERVICE MENU

f. Please click [1] UMTS > [1] DEBUGGING SCREEN > [6] Phone Control > [6] Network LOCK

g. You will see 3 OPTIONS within Network LOCK

h. Please click on number [1] Perso Sha256 INFO, the screen will change slightly

i. Please hit the MENU button then when the menu pops up please carefully hit BACK to return to the previous screen

j. Next Please click on number [2] Perso Sha256 ON, the screen will change again to a one line message

k. Restart the phone on the screen by holding the power button and click RESTART

l. When the phone prompts for the unlock code simply enter the unlock code provided to you

m. Your phone is now permanently unlocked!
*If this is not working, go to Solution #2


Solution #2

Follow these step carefully, as long as you have the correct code it will work 100%

1. Power off and on your phone with different network sim card. "SIM network unlock PIN" or "Enter Network Lock Control Key" screen will appear.

2. Type your Unfreeze code (MCK code) and hit Unlock button. You will get "unsuccessful message" again but don't worry.

3. Now type the Unlock code (Network or NCK code) and hit Unlock button.

*If phone say "Network Lock Succesful" it worked, but if not, proceed to step 4.

4. If you get "unsuccessful" again then hit Dismiss button and type *2767*3855# on phone keypad. (CAUTION! This will reformat all your data!)

5. After phone restarts, type the Unfreeze code (MCK code) when prompted to enter "SIM network unlock PIN" or "Enter Network Lock Control Key" screen and hit unlock button.

It will say "unsuccessful" again, don't worry!

6. Type the Unlock code (Network or NCK code) and hit Unlock button.

7. Your phone should now give you the message "Network Lock Successful"

Now your phone is successfully unlocked!

*If this is not working, go to Solution #3



Solution #3

1. Turn off the Wi-Fi on your phone and then turn device ON without SIM card.

Once its on go to phone dial screen and DIAL: *7465625*638*#
it will bring you to the NETWORK LOCK screen.

- in MCC/MNC field enter code for the service provider your phone is originally from (eg 31026 for T-Mobile USA)

check here for list of codes: http://en.wikipedia.org/wiki/Mobile_Network_Code

*If your network has more than one mcc/mnc please try all of them this is very important

- in CONTROL KEY field enter the UNLOCK code
- hit OK
- you should get a message: LOCK SUCCESSFUL

Power phone down, insert SIM card you want your phone to work with and power on.
Model: SGH-A127, SGH-E840, SGH-F210, SGH-J600, SGH-T749


1. Turn ON your phone without Sim Card
2. Type #0111*CODE# (CODE is the Unlock Code I sent you)
3. Device should say "Network Lock Deactivated"
4. The phone may reboot and the unlock is completed



Model: SGH-A877

1. Insert an Authorized Sim Card and turn ON your phone
2. Device must be in Portrait mode. Hit the Dial button on the touch screen.
3. Type #7465625*638*CODE# (CODE is the Unlock Code I sent you)
4. Device should say: “Network Lock Deactivated”
5. Phone may automatically reboot


Model: A737, A777, Blackjack SGH-i607, SGH-i616, SGH-i617, SGH-i627, SGH-i637, SGH-A877


1. Insert an Authorized Sim Card and turn ON your phone
2. Type #7465625*638*CODE# (CODE is the Unlock Code I sent you)
3. Device should say: “Network Lock Deactivated”
4. Phone may automatically reboot


NOTE: If you are unable to connect to service provider or unable to make outgoing calls or receive messages, this has nothing to do with your phone being locked or not, you need to force the Blackjack to change to GSM mode, this can be done as follows:


1. Type *#1546792*#
2. Select Option 3 Network & Call Settings
3. Select option 5 Network Mode
4. Select GSM
5. This should resolve your problem.


Model: AT&T / Cingular BlackJack

1. Insert an Unauthorized Sim Card and turn ON your phone
2. Power on the device. Wait approximately 30 seconds until the Sim Lock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code)
3. Enter the unlock code in the blank field
4. Press Ok. If the Unlock Code is incorrect, an error dialog will appear. After pressing Ok on this dialog, the user has to re-enter the Unlock Code after delays (see above in Device Specific Information). If the Unlock Code is correct, a success dialog will appear.
5. Press Ok
6. The device is now unlocked and should continue booting

Or

1. Insert an Unauthorized Sim Card
2. Enter Unlock code when prompted


NOTE: If you are unable to connect to service provider or unable to make outgoing calls or receive messages, this has nothing to do with your phone being locked or unlocked, you need to force the BlackJack to change to GSM mode, this can be done as follows:

1. Power on your Phone
2. Type *#1546792*#
3. Select Option 3 Network & Call Settings
4. Select option 5 Network Mode
5. Select GSM

Or

1. Power on without Sim Card, you will see a message saying "SIM Failure" at the top of the screen.
2. Click "Done" then press the green button to get into the dial pad. Type in #7465625*638*
3. You will see "Enter Network Control Key"
4. Enter Unlock Code
5. Click OK
6. Your phone is now unlocked

Model: Fido i616 Jack

1. Insert Fido Sim Card and power ON
2. Type #7465625*638*
3. Network Lock Screen appear, enter Unlock Code
4. Phone is now unlocked

Model: i450 & i560

1. Turn ON your phone without Sim Card
2. Type #PW+Unlock Code+1#

The letter P appear after you press star button (*) three times quickly
The letter W appear after you press the star button (*) four times quickly
The letter + appear after you press the star button (*) two times quickly

Model: i780

1. Insert an Unauthorized Sim Card and turn ON your phone
2. Enter the PIN code to Sim Card
3. At the top of screen an "exclamation mark" icon will appear
4. Click on "exclamation mark" icon
5. Settings Link will appear
6. Click on it
7. Virtual keyboard appears on screen with Enter PIN prompt
8. Enter Unlock Code

Model: i900 / Omnia

1. Make sure Wireless Mode is ON
2. Insert an Unauthorized Sim Card and turn ON your phone
3. Enter the PIN code of this refused Sim Card
4. Now should ask for Unlock Code
5. Enter Unlock Code


Model : J600
Unlock Code is enter as: #0149*MCK# or #0111*NCK#

1. Press the # button on the keypad 1 time to display #
2. Type the 4 digit code which corresponds to your lock type (in most cases the MCK code will work with code:1)
3. Press the star (*) button on the keypad 1 time
4. Enter Unlock Code which corresponds to your lock type
5. Press the # button on the keypad 1 time
6. Phone should now be unlocked
7. If phone is still locked, you have a 2nd lock activated so please check locks and enter 2nd code

Model: SGH-P207

1. Reset to original factory setting by typing *2767*3855#, your phone will reboot
2. Insert an unauthorized Sim Card and turn ON your phone
3. A Wrong Sim message will appear
4. Enter * #9998*3323#
5. Exit white screen appear, tap the right soft key, (occasionally it will not go to the next screen, if so press the down key)
6. Menu appear, scroll down to the malloc Fail option, this will reboot, and normal service screen will appear
7. Enter *0141# and press the green Call key
8. Personalized screen appear, the name of the current Sim Card provider will appear on the screen
9. Turn phone OFF, and then turn back ON
10. Go to menu by tapping left soft key
11. Settings is in bottom right hand corner
12. Select option 7 = Security
13. Select option 6 = Sim Lock
14. Select option 1 = Disable
15. Enter 00000000 (eight zeros), the message will come up Sim lock disabled with a check mark; your phone is now unlocked to use with other carriers.


Model: SGH-T609


1. Turn ON your phone without Sim Card
2. Type #011*CODE# (CODE is the Unlock Code I sent you)
3. Device should say: “Network Lock Deactivated”
4. Phone may automatically reboot



Model: Zxxx Series, Dxxx Series, Pxxx Series, F490 (ex: Z140, D520, P200, etc...)


1. Insert an Unauthorized Sim Card and turn ON your phone
2. Enter #7465625*638*CODE# (CODE is the Unlock Code I sent you)





Model: Z320i, Z510, Z650i


1. Insert an Unauthorized Sim Card and turn ON your phone
2. Type **CODE# (CODE is the Unlock Code I sent you)
Or
1. Insert an Unauthorized Sim Card and turn ON your phone
2. Type #0111*CODE# (CODE is the Unlock Code I sent you)


Model: Most Non Android Samsung


1. Insert an Unauthorized Sim Card and turn ON your phone
2. Phone will ask for "Password"
3. Enter Unlock Code

Or


1. Insert an Unauthorized Sim Card and turn ON your phone
2. Type #0111*CODE# (CODE is the Unlock Code I sent you)





PHONE FREEZE: SIM Unavailable


1. Insert an Unauthorized Sim Card and turn ON your phone so phone displays "Phone Freeze, SIM unavailable. Please contact service provider"
2. Enter MCK (Defreeze Code) and press "OK", "Confirm" or the center button (no digits will be seen on display when entering this code)
3. Now phone will ask you for Network Code, enter NCK (Unlock Code) and press OK.
4. If nothing happens when you enter NCK (Unlock Code), you will need to compose code like this: #7465625*638*CODE# (CODE is the Unlock Code I sent you)
5. Now your phone should be unlocked.

Note. If phone does not accept NCK (Unlock Code), and still have no luck with #7465625*638*CODE# (CODE is the Unlock Code I sent you), please try step 4 using MCK (defreeze code)



To solve "Phone Freeze" or "Return for service problem"


1. Insert an Unauthorized Sim Card and turn ON your phone
2. Enter "Defreeze" Code (it will not be visible) and click OK key. (If you purchased our Samsung Factory method, then the "Freeze Code" is also known as Defreeze Code)


Or


1. Insert an Unauthorized Sim Card and turn ON your phone
2. Screen will display "Phone is freeze / SOS"
3. Type the Defreeze Code (Nothing will show on screen)
4. Hit the "Enter Button"
5. Phone will ask for the Network Lock Code
6. Enter Unlock Code
7. Phone will be unfreeze and unlocked


STILL NEED TO UNLOCK - GO HERE

How To Unlock Sanyo:



Model: All Sanyo
1. Insert an unauthorized Sim Card and turn ON your phone
2. Enter Unlock Code

STILL NEED TO UNLOCK - GO HERE

How To Unlock Sendo:



Model: All Sendo
1. Insert an unauthorized Sim Card and turn ON your phone
2. "Enter NCK" box will appear
3. Enter Unlock Code
STILL NEED TO UNLOCK - GO HERE

How To Unlock Sharp:

Model: All Sharp

1. From front screen, enter *01763*6371#

2. The handset will reset back to the main screen

3. Press M button

4. Scroll to Settings and press Select

5. Scroll to Security and press Select

6. Scroll to MEP locks and press Select

7. Enter your Handset Code (the default code is 0000) and press OK

8. Scroll to Network and press Select

9. Scroll to Deactivate and press Select

10. Enter Unlock Code and press OK

11. Handset should then display DONE and be unlocked.


Model: Other Models


1. Enter Non authorized sim card and enter code.
STILL NEED TO UNLOCK - GO HERE

How To Unlock T-Mobile Sidekick:

Via Unlock Code

Model: All Sharp (Motorola model check How to Unlock Motorola)

1. Insert a SIM card from a different network provider and turn on the Sidekick

2. A dialog screen comes up, prompting you for the code

3. The box will say: Title: Special Code Required Dialog: Enter code to enable SIM Box for Code: 1-8 digits Options: Enable or Cancel

4. In the upper right hand corner, the SIM is flashing where the signal strength should be. On entering the code, a dialog box comes up saying authenticating code. Its unlocked. Enjoy



In case you see the “Waiting for Activation Screen”, hit the menu key and the letter L key at the same time. The menu key is the top left key. By doing this, the waiting screen will go away and you will be able to make calls. For best results, hold down Menu and the L key until the Waiting for Activation screen disappears.

Via Login User Name and Password
Model: Sidekick 2009 PV300
1. Click DOWNLOAD SideKick V.5 online and save the zip file onto your desktop. After download is complete, you need to click to open and run the setup wizard file. Then open the PV300 Instruction text file.
2. Follow the PV300 Instructions text file in the zip.

STILL NEED TO UNLOCK - GO HERE

How To Unlock Siemens:

---

Model: All Siemens (Unlock Method 1)
1. Insert an unauthorized Sim Card and turn ON your phone
2. Enter *#0000*Unlock Code#



Model: All Siemens (Unlock Method 2)
1. Insert an unauthorized Sim Card and turn ON your phone
2. Enter *#0001*Unlock Code#

STILL NEED TO UNLOCK - GO HERE

How To Unlock Sierra Wireless Aircard:

---

Model: Sierra Wireless Aircard
1. Please download and install Sierra Watcher
2. Install Sierra Watcher
3. Insert an unauthorized Sim Card and turn ON your phone
4. Sierra Watcher will prompt you to enter unlock code
5. Enter Unlock Code Notice: Please make sure to enter the unlock code correctly.
STILL NEED TO UNLOCK - GO HERE

How To Unlock Sony:

---

Notice: Ericsson, Sony, and Sony Ericsson are three different instructions. If you have Sony Ericssion, you MUST follow How To Unlock Sony Ericsson.


Model: All Sony
1. Insert an unauthorized Sim Card and turn ON your phone
2. Enter *#7465625*12*Unlock Code#

STILL NEED TO UNLOCK - GO HERE

How To Unlock Sony Ericsson:

---

Model: All SonyEricsson
1. Turn ON your phone without Sim Card
2. Press left arrow ONE TIME
3. Press * button TWO TIME
4. Press left arrow ONE TIME
5. The message "Personalize with MNC2" will appear
6. Enter Unlock Code. It may be necessary to PRESS ENTER or OK


NOTICE: If your phone have a "JOGDIAL" (Ex: SonyEricsson K700i) you must press "down arrow" instead of "left arrow" for step 2 & 3. We mean by "Down Arrow" to direct the Jogdial down.
STILL NEED TO UNLOCK - GO HERE

How To Unlock HP, HTC, iMATE, T-MOBILE:

---

HTC, SPV, MDA, XDA, iMATE and T-Mobile G1, G2
1. Insert an unauthorized Sim Card and turn ON your phone
2. If phone ask, enter the PIN code of your SIM Card
3. Enter Unlock Code


Model: SPV C500
1. Insert an unauthorized Sim Card and turn ON your phone
2. The message "PUK2" appear
3. Enter Unlock Code
4. If phone ASK for New Code PIN enter 0000
5. Confirm and enter 0000**
6. Click "Finish" and phone will show "Network is locked..."
7. Enter Unlock Code and click "Finish"
8. Restart the Mobile and now is Unlocked
STILL NEED TO UNLOCK - GO HERE

How To Unlock Toshiba:


Model: Portage G710
1. Insert an authorized Sim Card and turn ON your phone
2. Enter PIN code, when phone is ready
3. Select Start
4. Select Accessories
5. Select Unlock Sim
6. Enter Unlock Code
7. Click Accept


Model: All Toshiba (Unlock Method 1)
1. Insert an unauthorized Sim Card and turn ON your phone
2. Enter Unlock Code


Model: All Toshiba (Unlock Method 2)
1. Insert an unauthorized Sim Card and turn ON your phone
2. The display will show Enter Network Unlock Code
3. Enter **00012*47369761#, then press the centre menu key
4. The display will now show Done
5. Switch the phone off and on. The phone will now be unlocked


Model: TS803
1. Insert an unauthorized Sim Card and turn ON your phone
2. The display will show Sim Error. This Sim Card cannot be used
3. Press the center menu key for 3-4 seconds. The display will show Enter Code
4. Enter Unlock Code
5. The handset will then reboot itself. Once completed, the handset will be unlocked
STILL NEED TO UNLOCK - GO HERE

How To Unlock Trium:


Model: Trium Mars
1. Turn ON your phone without Sim Card
2. Press and hold * key and enter 787090 or 787292
3. The Menu "Unlock Network" will appear
4. Select "YES"
5. Enter Unlock Code
STILL NEED TO UNLOCK - GO HERE

How To Unlock UTStarcom:


Model: GTX750R
1. Insert an authorized Sim Card and turn ON your phone
2. Enter *#865625#
3. Enter Unlock Code
STILL NEED TO UNLOCK - GO HERE

How To Unlock Vitel:


Model: All Vitel
1. Insert an unauthorized Sim Card and turn ON your phone
2. Enter Unlock Code


Model: TSM7
1. Turn ON your phone without Sim Card
2. Enter ##**9987
3. Enter Unlock Code
STILL NEED TO UNLOCK - GO HERE

How To Unlock VK Mobile:


Model: VK530
1. Turn ON your phone without Sim Card
2. The screen will display Insert Card
3. Enter *#83*737# (press and hold # for 1 sec), this will open “Personalization Menu”
4. Select Disable Personalization
5. Enter Unlock Code
6. Press OK
7. Handset should now be unlocked
STILL NEED TO UNLOCK - GO HERE

How To Unlock Womu:


Model: All Wonu
1. Insert an unauthorized Sim Card and turn ON your phone
2. Enter Unlock Code
STILL NEED TO UNLOCK - GO HERE

How To Unlock ZTE:

Model: All Model
1. Switch ON your phone with an Unauthorize SIM Card
2. Phone will prompt for Unlock Code
3. Enter the Unlock Code
4. Your phone is now unlocked